Kieth Copeland's Site

All new properties that are being developed have pretty high standards that must be met for energy efficiency. Naturally, that is not the case for older homes. The best way to make an older house significantly more energy efficient is to use insulation. It is not easy to do if you have exterior side walls but it is possible with blown-in insulation in your attic. This can certainly make your household warmer in the winter, and also cooler in the summer. If you live in an old house, you will probably find that the insulation employed is only newspapers.

Tenant eviction ...Today, insulation has become something of a science because of our anxiety for the environment. Insulation components have something called an R-value, which is used to determine the amount of insulation necessary based on what part of the country you live. In areas which will get very cold through the winter require insulation with a high R-value while other areas may require just a lower one. One of the most beneficial products to be observed for cutting down heating costs is blown-in insulation. There are several benefits for applying this type of insulation over the standard rolls of fiberglass insulation, such as where it can be used, energy efficiency, and how it is installed.

There are many good points why blown-in insulation would be the way to go, one of them is that it can easily be adjusted. You can adjust the R-value by how much insulation you choose to use. When you have to have an R-value of 15, you just simply blow a measured quantity of insulation, in the event that you need a higher R-value, just add more insulation. Another reason to use blown-in insulation is that its usually made from virgin materials so there is certainly less chance of getting allergies. A firmer seal can be gotten with blown-in insulation, since it fills all of the cracks, and empty spaces. Youll find it does not take much effort to install and all open spaces will be filled consequently making your home more energy efficient.

Installing blown-in insulation is straightforward for a newly framed house. What you need to do is attach a netting over the studs of the exterior wall, then cut a couple of small holes, place the insulation line in the hole and fill up the wall cavity. The material blown in sticks to the studs, and totally fills all of the empty spaces. Mask the wall surfaces by having a vapor barrier, and drywall and you are done. To do loft insulation, you drywall the ceiling first then go into the attic and blow it in from there. Its a lot more difficult with older homes since the wall covering may have to be removed first before installation. After that the process is pretty much the same. If you live in a very old house, you could just make a hole in a wall and blow the insulating material in, then cover it up.

Though it comes with a high initial cost, you will save a whole lot of money in the long run. If you need a comfortable and energy efficient home, then getting blown-in insulation is your best bet.